產品詳情
HXD-4型爐膛吹灰器主要用于清除鍋爐水冷壁上的積灰和結渣。采用單噴嘴前行到位后定點旋轉吹灰。根據積灰(或結渣)的性質和鍋爐不同部位的吹灰要求,吹灰器的吹掃弧度、吹掃圈數和吹灰壓力都可進行調整,以期達到最理想的吹灰效果。
The HXD-4 furnace soot blower is mainly used to remove dust and slagging on the water cooled wall of the boiler. Use a single nozzle to move forward and rotate at a fixed point for soot blowing. According to the nature of ash accumulation (or slagging) and the blowing requirements of different parts of the boiler, the blowing arc, number of blowing circles, and blowing pressure of the soot blower can be adjusted to achieve the optimal blowing effect.
主要技術參數: Main technical parameters: 吹灰器行程:267mm(10.5”) Soot blower stroke: 267mm (10.5 ") 吹灰器行進速度:290mm/min Travel speed of soot blower: 290mm/min 吹灰槍轉速:2.3 rpm Soot blower speed: 2.3 rpm 每次工作時間:2.76min(吹掃1圈) 3.62min(吹掃2圈) 4.49min(吹掃3圈) Each working time: 2.76 minutes (1 cycle of blowing) 3.62 minutes (2 cycles of blowing) 4.49min (3 cycles of blowing) 吹灰介質:過熱蒸汽或壓縮空氣 Soot blowing medium: superheated steam or compressed air 吹灰壓力:~1.5MPa Soot blowing pressure:~1.5MPa 介質耗量:~30kg(吹掃1圈) ~60kg(吹掃2圈) ~90kg(吹掃3圈) Medium consumption:~30kg (1 cycle of blowing) ~60kg (2 cycles of blowing) ~90kg (3 cycles of blowing) 噴嘴數量:1個 Number of nozzles: 1 噴嘴口徑:25.4mm Nozzle diameter: 25.4mm 噴嘴后傾角:3° Rear inclination angle of nozzle: 3 ° 有效吹灰半徑:1.5~2m Effective blowing radius: 1.5~2m 電動機型號及有關參數:YSR-6324 B5型 0.18kw ~1370 rpm.380v 3P 50Hz Motor model and related parameters: YSR-6324 B5 type 0.18kw ~1370 rpm. 380v 3P 50Hz 重量:~110kg Weight:~110kg |
主要零部件 Main components 1.提升閥 1. Lift valve 2.內管 2. Inner tube 3.吹灰槍與噴頭 3. Soot blower and nozzle 4.減速傳動機構 4. Reduction transmission mechanism 5.導向桿系統 5. Guide rod system 6.箱體及蓋板 6. Box and cover plate 7.電氣控制機構 7. Electrical control mechanism 8.墻箱 8. Wall box |
公司產品廣泛應用于火電、冶金、化工、造紙、垃圾處理、硫化床鍋爐及其它余熱鍋爐。目前公司已是哈鍋、上鍋 、武鍋 、杭鍋、錫鍋、川鍋、濟鍋、蘇源環保、武漢凱迪等的合格分供方。為國內各大鍋爐廠配套300MW、600MW及1000MW機組電站鍋爐項目。產品業績遍布全國二十八個省、市、自治區,并出口印度、印尼、越南、泰國、馬來西亞等東南亞國家。
上一個:
下一個:
產品咨詢